How to solve the residual gas in pure water equipment?
Views : 304
Update time : 2022-02-14 09:43:44
The serious water pollution has caused many people to doubt drinking water. Is our drinking water clean? Some people simply give up tap water as drinking water and choose to install pure water equipment to provide daily water. The editor here wants to remind users who use pure water equipment that when there is residual gas in the pure water equipment, it must be dealt with in time, otherwise it will affect the use of the equipment. So, how to solve the residual gas in the pure water equipment? This happens for two reasons:
1. When the pure water equipment starts running again, the gas in the equipment is not exhausted and the pressure is quickly increased. Solution: The remaining air should be exhausted under the pressure of 2 ~ 4bar, and then the pressure should be gradually increased.
2. When the joint between the pretreatment system of the pure water equipment and the high-pressure pump is not well sealed or the pretreatment water supply is insufficient, if the microfiltration is blocked, air will enter in the place where the sealing is not good. Solution: Clean or replace the microfilter to ensure that the pipeline does not leak.
The above content is the treatment method of residual gas in pure water equipment. If residual gas occurs in the process of using pure water equipment, users can refer to the above methods for treatment. If you have other questions,please contact Guangdong VOLARDDA Water Purification Equipment CO.,Ltd.
