What is the general conductivity of effluent from CSM RO membrane?

                                       
  CSM RO reverse osmosis membrane is a relatively cost-effective brand on the market. Its 4-inch and 8-inch membrane models are RE4040BE, RE4040BLN, RE4040BLR, RE8040BE, RE8040BN, RE8040BLN, RE8040BLR, and different models are used in different water sources. , Low pressure and ultra-low pressure membranes are usually suitable for tap water, well water or other water sources suitable for high pressure membranes. The conductivity of the effluent can reach 10US or 5US or less if the water source according to the influent standard of the reverse osmosis membrane, but if the pretreatment of the influent water is not done well, it cannot meet the influent requirements of the reverse osmosis membrane, whether it is conductivity or It is difficult to achieve the ideal state of the flow rate of the produced water. Generally, the conductivity of the influent water is below 500US, and the effluent can reach below 10US. The conductivity of the influent water exceeds 500. It is recommended to use two-stage reverse osmosis.