EDI ultra-pure water equipment during the daily operation of attention details
The long-term operation of industrial EDI ultra-pure water equipment depends not only on the initial design of the system, but also on proper operation and maintenance. This includes the initial startup of the system and the startup and shutdown during operation.
Proper start-up of industrial EDI ultra-pure water equipment is necessary to prepare EDI for normal operation and to prevent damage to the EDI module due to excessive flow, water hammer or current overload. Following the procedures below will also help ensure that the system is operating within the system design parameters to achieve water production that meets the design requirements. For the start-up operation of the system, the data of the first system operation is an important component. Before starting the EDI system, the installation of the RO system, the installation of the EDI module, the calibration of the meter, and the inspection of other systems should be completed.
1, a large part of the reason for the short life of ultra-pure water equipment is because of the work day and night, long-term work is certainly not, just like people only work for 12 hours, if the time is longer, it is equal to consuming people's vitality, mechanical equipment is the same, long working time will be the friction of various parts inside these can cause equipment short service life.
2, only do not maintain, this is also a great relationship, the use of equipment should be maintained from time to time, otherwise has been working is very wear equipment, appropriate maintenance can improve the viability of the equipment.
3, a very important point is the quality of the equipment, poor quality life naturally broken, if the quality of the equipment is good, then you can use for a period of time. Pay more attention to the quality of equipment when purchasing equipment.
The above is the details that need to be paid attention to during the daily operation of EDI ultra-pure water equipment. In order to maintain the long-term good operation of the system, we also need to regularly record the system operation data for daily operation and maintenance in the future. Moreover, the daily operation and maintenance data are of great significance in determining equipment failure and deciding what measures to take.
