How to solve the residual gas in the pure water equipment

The serious water pollution phenomenon has caused many people to doubt whether our drinking water is clean? Some people simply give up using tap water as drinking water and directly choose to install pure water equipment to provide daily water.

The editor here wants to remind users who use pure water equipment that when there is residual gas in the pure water equipment, it must be treated in time, otherwise it will affect the use of the equipment. So, how to solve the residual gas in the pure water equipment?

There are generally two reasons for this situation:

1. When the pure water equipment restarts, the gas in the equipment is not exhausted and the pressure is increased quickly.
Solution: After the remaining air is exhausted under the pressure of 2 to 4 bar, the pressure should be gradually increased.

2. When the joint between the pretreatment system of the pure water equipment and the high-pressure pump is not well sealed or the pretreatment water supply is insufficient, if the microfiltration is blocked, air will enter in the poorly sealed place.
Solution: Clean or replace the micro filter to ensure that the pipeline does not leak.

The above content is the treatment method of residual gas in the purified water equipment. If the residual gas occurs in the process of using the purified water equipment, the user can refer to the above method for treatment. If you have other questions, you can consult customer service and we will answer them in detail.