Categories
Pure water equipment can be said to be the most popular water treatment equipment now, and many users choose to use pure water equipment. After the user purchases the purified water equipment, there is a problem that needs to be paid attention to, that is, the installation of the purified water equipment.
The user must follow the relevant instructions and ask the workers to install it correctly. Any error in any step may affect the normal operation of the purified water equipment. In order to let everyone know the correct installation method of purified water equipment, here is a brief introduction.
♦ The installation location should be reasonable, and the pure water equipment host and pretreatment device should be placed on a flat ground, preferably close to the water source and the power source.
♦ Fill with filter materials such as quartz sand, activated carbon, and softened resin.
♦ Connect the waterway. The inlet of the raw water pump is connected to the water source, the outlet of the pre-filter is connected to the inlet of the main engine, and the pre-conditioner and the outlet of the main engine are connected to the sewer by pipelines.
♦ Connect the grounding wire to the ground reliably, and connect the supplied power cord to the electrical control box of the room.
♦ Connect the water source and power source, and follow the steps in the "Pretreatment Operation Instructions" to complete the pretreatment debugging operation.
♦ Using this machine, the original water pump switch is set to the automatic position, and the shutdown switch is turned on. Connect the water source and power supply, and when the pressure of the multi-stage pump port reaches the set value of the pressure controller, the multi-stage pump starts to work. After the multi-stage pump is started, adjust the system pressure at 1.0-1.2Mpa. The RO membrane system should be manually flushed for 30 minutes at the first startup.
The user only needs to install the purified water equipment according to the above operation. The editor here wants to remind users that the correct installation method can effectively protect the purified water equipment. If you don’t know how to install it, please contact the purified water equipment manufacturer in time. Professional technicians will install it for you. There are so many introductions about the installation of pure water equipment. If you want to know more information about pure water equipment, you can consult our customer service.
