Categories
Pure water equipment has changed our lives, so that we no longer worry about water pollution. Nowadays, pure water equipment has been applied to various fields of production and life. However, users who use pure water equipment have noticed that pure water equipment requires raw water quality, and it is not possible to use pure water equipment for any water quality. Today, the editor will popularize the raw water requirements of pure water equipment for everyone.
• PH=4-7
• The original water hardness is 10-250mg/L, so42-=100-1000mg/L, CI2=0-1mg/L, COD (MN) is less than 3mg/L.
• Temperature=5-45
• Urbidity is less than 0.2NTU, SDI is less than 5
The raw water can enter the reverse osmosis host of the system only when the above conditions are met. Otherwise, the reverse osmosis membrane will be destroyed, and the effluent water quality will not reach the standard of pure water, the conductivity will be high, and the service life of the equipment will be affected. I believe that through these introductions, you can also understand the importance of raw water quality to purified water equipment, so users must not be careless. If you encounter any problems in the process of using purified water equipment, please feel free to consult us.
