Categories
Overview
Quartz sand filter is a pressure filter, using high-quality quartz sand filter material filled in the filter, when the influent water flows through the filter layer from top to bottom, the suspended solids and viscous particles in the water are removed, so that The turbidity of the water is reduced.
working principle
It is a common method to use the interception and filtration effect of quartz sand filter to remove large-diameter impurity particles, concentrated colloids and suspended solids, which has the characteristics of low cost, convenient operation and maintenance and management. High filtration accuracy, effective removal of colloidal particles and polymer organics; normal temperature operation, acid and alkali resistance, oxidation, equipped with complete detection instruments, to achieve automatic and manual dual control.
Application field
Mechanical filters are widely used in the water treatment process, mainly used for water treatment turbidity removal, reverse osmosis, and the pre-pretreatment of ion exchange softening and desalination systems. It can also be used for surface water, groundwater, etc., which can effectively remove water Suspended matter, organic matter, colloid, silt, etc. It can be widely used in electronic power, petrochemical industry, metallurgy and electroplating, paper and textile, pharmaceutical dialysis, food and beverage, drinking water, factory and enterprise water, swimming pool, etc. It can meet the needs of liquid filtration in various industries.
Performance characteristics
1. The equipment operation cost is low, and the management is simple;
2. The filter material can be used multiple times after backwashing, and the service life is long;
3. Good filtering effect and small floor space;
Product parameter
♦ Design pressure: 0.6MPa (more than this value requires explanation)
♦ Working temperature: 5℃-40℃ (special temperature can be customized)
♦ Surface treatment: wire drawing, mirror polishing, painting
♦ Internal treatment: rubber lining, plastic lining, epoxy resin brush
♦ Cylinder material: Q235B, SUS304, SUS316L
♦ Single flow rate: 1-100m3/h
♦ Influent turbidity: ≤20mg/L
♦ Turbidity of effluent: ≤3mg/L
